The axle shaft may be considered a extremely considerable element of just about every vehicle. even although the method to replace one will differ slightly in between models, there are standard actions standard to all.
Instructions

1
remove car hubcap.
2
Loosen the axle shaft nut, situated within extremely center in the wheel. Occasionally, you may need to cut back a hat of some sort first, usually fastened using a cotter pin. Use pliers.
3
Jack up the car, placing it on jack stands.
4
Remove the wheel.
5
Remove the brake calipers. They must turn into linked with bolts in the direction of rotor.
6
Pull away the calipers, rotating them apart away from your rotor.
7
Pull away the rotor.
8
On the back again in the knuckle, there will possibly be two or three bolts holding the hub in place. remove them.
9
Now the hub need to appear off.
10
Remove the axle nut. This may need a drill with huge torque.
11
Beneath the hub may be the dirt shield. create a be aware of which way it is facing to make certain that you just don't re-install it the incorrect way. remove it.
12
Now you need to the the axle shaft sticking out. remove it extremely gingerly.
13
Insert the brand new axle shaft, remembering to turn into extremely careful.
14
Replace the dirt shield.
15
Replace and tighten the axle nut, in add-on to the cotter pin if there is one.
16
Replace the hub, and re-insert the bolts for the back again in the knuckle.
17
Replace the wheel.
18
Lower the car onto the ground.
19
Replace the hubcap.The axle shaft may be considered a extremely considerable element of just about every vehicle. even although the method to replace one will differ slightly in between models, there are standard actions standard to all.